High Frequency Common Mode Choke For SMT Data Line EMI Filters

SMT Data Line EMI Filters , common mode choke

Data line common mode chokes provide general purpose EMI filtering from lower-speed data rates to ultra-high speeds such as USB3.x, HDMI2.0, and IEEE 1394. Eliminate CM noise in CAN, CAN FD, and FlexRay automotive bus systems.

Feature

• Exceptional common mode noise attenuation from 15 MHz to 300 MHz; passes signal line data below 300 MHz with minimal attenuation
• DC current capacity of 500 or 100 mA.
• Excellent electrical isolation – 300 Vrms for 1 minute
• Core material Ferrite
• Ambient temperature –40°C to +85°C
• Storage temperature Component: –40°C to +85°C.
• Tape and reel packaging: –40°C to +80°C
• Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
• Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)
• Packaging 1000/13″ reel Plastic tape: 16 mm wide, 0.46 mm thick, 12 mm pocket spacing, 4.5 mm pocket depth